686 type guide column trapezoidal color steel tile forming equipment

The 686 guide column trapezoidal color steel tile forming equipment adopts high-level automatic control software to achieve production information management. The entire unit automation control system uses a highly integrated network to ensure good automation system performance. The JCX-686 guide column trapezoidal color steel tile forming equipment also has operation, maintenance, and the color steel tile pressing machine equipment adopts high-level automatic control software to achieve production information management. The entire unit automation control system adopts a highly integrated network to make the automation system performance superior. The color steel tile equipment also has advantages such as operation, maintenance, mechanical debugging, and easy mold replacement.

686 type guide column trapezoidal color steel tile forming equipment product application:

The 686 type guide column trapezoidal color steel tile forming equipment is widely used in the production of roofs and walls of various industrial plants, housing, warehouses, and has a beautiful and elegant appearance.

Common problem handling of 686 guide column trapezoidal color steel tile forming equipment:

1. If the equipment board runs to the right, iron blocks need to be placed on the left corner, or the right roller needs to be flattened. If the axis deviates, flatten the axis. The upper roller should be consistent with the lower roller. If the upper roller is flattened, the lower roller should also be flattened. A uniform and symmetrical roller cannot be changed.

2. You can also adjust the four corners of the front and rear rows of the color steel forming machine from the main frame to a consistent height at the upper end of the bottom shaft. Then, from one row to the next, find a straight line and check if the lower shaft is on a horizontal line. Adjust the left and right sides of the lower shaft to be level.

3. Find the symmetrical points in one row and then another row of the color steel forming machine, and then tighten the locking nuts on both sides. Draw a straight line in front and behind the center of the middle wheel, adjust the gap between the upper and lower shafts, and then adjust the machine along the straight line.

4. In fact, the remedies for board deviation require long-term production and testing. Different directions of deviation have different remedies, but one thing to note is that whether it is mechanical rollers or other parts, they need to be aligned on both sides. Only by aligning on both sides can symmetry be maintained and the shape of the product produced will be regular.