850 type glazed tile machine

The 850 type glazed tile machine roll molded antique glazed tiles have the characteristics of beautiful appearance, antique elegance, exquisite and unique shape, and excellent taste. They can be widely used in garden style factories, tourist scenic areas, pavilions, hotels, villas, exhibition halls, resorts, homes and other buildings and outdoor decoration.

The 850 type glazed tile machine unit includes a forming host, hydraulic station, discharge rack, forming shear, control box, and discharge rack.

1. Dimensions of the material rack: length 860mm x width 1450mm x height 1124mm

2. Maximum speed limit of molding machine: 10m/min

3. Thickness of formed color steel plate: 0.5-0.6mm

4. Expanded width of formed color steel plate: 1000mm

5. The molded glazed tile has excellent effect, with a width of 828mm and a deviation of ± 1/100

6. Wave height of formed glazed tile: 28mm, deviation 28-0.3

7. Roll shaft diameter: Φ 70mm

8. Computer operation panel, text screen

9. The unit includes: forming host, hydraulic station, feeding rack, forming shear, control box, and discharge rack.

Before using the 850 type glazed tile machine, it is necessary to check whether the connections are secure, whether the installation bolts and nuts are tightened, and whether sufficient lubricating oil should be added to the left and right chassis before starting the machine for testing. First, run the machine empty and carefully observe whether there is vibration, noise, whether the oil window is filled with oil, and whether the movements of various components are coordinated. Only then can the mold be installed. When installing the mold, cut off the power supply and manually move the motor belt or large gear to rotate the worktable and raise the sliding seat to a high point. It is better to use an object to support it between the worktable and the bottom of the sliding seat, so that the sliding seat can fall naturally and cause an accident. The mold used in this machine requires one upper mold and six lower molds of the same size and specifications. First, install the upper mold and one lower mold. The lower mold is directly installed on the hexagonal wheel worktable, and the upper mold is installed on the bottom surface of the sliding seat, with an appropriate thickness of cushion plate placed to protect the upper and lower molds. After the molds are closed, the gaps around the edges are uniform, and the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then, based on the upper mold, the worktable is rotated and the remaining five lower molds are installed. Only after all the upper and lower molds are installed can the vehicle be driven to press the tiles.