840/900 widened double-layer glazed tile machine

840/900 Widening Double layer Glazed Tile Pressing Width: The double-layer tile pressing machine consists of a complete machine, PLC computer control system, hydraulic pump station system, and fully automatic rear shearing system. The entire machine is controlled by industrial computer PLC. The 840/900 widened double-layer glazed tile machine adopts a double-layer design, which can be used for both purposes, occupies a small area, is easy to transport, and saves costs.

The 840/900 widened double-layer glazed tile machine has a simple upper and lower layer conversion operation. Simply use the conversion button on the electric control cabinet to switch and control each layer separately. The power can also be controlled separately for each layer through the clutch. Optional configurations include regular discharge machines and hydraulic discharge machines. The models of the upper and lower layers are determined according to customer requirements. Technical parameters of double-layer glass tile press: The large frame is made of 300H steel, the chain is 6 minutes long, the shaft diameter is 70mm, it adopts 11 rows on the top and 9 rows on the bottom, and the cutting head is welded with steel plates. The vertical board is 14mm. It is equipped with double chains hanging inside.

The 840/900 widened double-layer glazed tile machine produces antique style glazed tiles through rolling and stamping, which have the characteristics of beautiful appearance, antique elegance, exquisite and unique design, and good taste. They can be widely used in villas, resorts, garden style factories, tourist attractions, pavilions, hotels, exhibition halls and other buildings.

The 840/900 widened double-layer glazed tile machine is mainly composed of a feeding machine, a feeding introduction platform, a forming host, a die pressing device, a forming shearing device, a hydraulic station, a computer control system, and a finished product bracket. Optional configurations include regular feeding machines, hydraulic feeding machines, automatic chopping machines, etc.

Before using the 840/900 widened double-layer glazed tile machine, it is necessary to check whether the connections are secure, whether the installation bolts and nuts are tightened, and whether sufficient lubricating oil should be added to the left and right chassis before starting the machine for testing. First, run the machine empty and carefully observe whether there is vibration, noise, whether the oil window is filled with oil, and whether the movements of various components are coordinated. Only then can the mold be installed. When installing the mold, cut off the power supply and manually move the motor belt or large gear to rotate the worktable and raise the sliding seat to a high point. Use an object to support it between the worktable and the bottom of the sliding seat, so that the sliding seat can fall naturally and cause an accident. Partial precision wheel rotation molding, with good molding effect, increases the friction between the wheel and the raw material, easy debugging, suitable speed, and can greatly limit control without deviation. The 840/900 widened double-layer glazed tile machine produces innovative curved color steel glazed tile patterns, suitable for iconic buildings. The width of the incoming plate is 1200mm, and automatic molding and shearing are integrated.