840-900 Flat cutting three-layer machine

The 840-900 flat plate cutting three-layer machine can produce various appearances of roof panels according to production needs. The formed panels rolled by this machine have a smooth appearance, uniform ripples, good utilization rate, high strength, good production automation degree, and good yield.

840-900 flat cutting three-layer machine is suitable for large and medium-sized enterprise civil buildings, such as factories, locomotive depots, aircraft hangars, sports venues, exhibition halls, cinemas, etc.

Key points for installing 840-900 flat cutting three-layer machine:

(1) For the convenience of maintenance and repair, please keep a distance of at least 50cm from the wall

(2) Then make detailed adjustments: the machine rack must be horizontally calibrated to maintain the level of detail

(3) Secondly, for the installation of the foundation, the following important items are required: A The strength must be able to match the weight of the machine B The base surface must be flat

(4) Installation of color steel tile equipment (refer to the instruction manual)

(5) A place with good power supply is required

840-900 Maintenance and upkeep of flat cutting three-layer machine:

1. Strictly follow the operating procedures for operation.

2. It is strictly prohibited for non designated personnel to operate the equipment, and the machine should be stopped when people leave.

3. The hydraulic oil in the oil pump should be regularly refilled and the electrical components should be checked regularly to ensure normal and stable operation.

Technical parameters of 840-900 flat cutting three-layer machine:

Installation dimensions: 6500mm × 1200mm × 1500mm

Number of molding channels: 11 channels

Roller material: 45 # steel

Thickness of roller electroplating layer: 0.05mm

Cutting blade material: Cr12

Forming speed: 9-10m/min

Electrical control system: Industrial computer PLC control, component application: Delta, Delixi, Chint and other excellent component combination assembly

Inverter: Accurate counting and anti knife function (optional)

Host power: 3kw with No.4 planetary cycloidal reducer

Hydraulic station power: 3kw

Plate thickness: 0.3-0.8mm

Unfolding width of board: 1000mm

Inverter (optional)