860 Color Steel Tile Pressing Machine

Main technical parameters of 860 color steel tile press equipment:

1. Installation dimensions: 5100mm × 600mm × 600mm

2. Number of molding channels: 11 channels

3. Roller material: 45 # steel

4. Thickness of roller electroplating layer: 0.05mm

5. Cutting blade material: Cr12

6. Forming speed: 9-10m/min

7. Electrical Control System: Industrial Computer PLC Control

8. Inverter: Accurate counting and anti knife function (optional)

9. Host power: 3kw

10. Hydraulic station power: 3kw

11. Board thickness: 0.3-0.7mm

12. Unfolding width of board: 1000mm

Scope of application of 860 color steel tile press equipment: It is widely used in industrial and civil buildings, such as factory buildings, warehouses, locomotive depots, aircraft hangars, sports halls, exhibition halls, cinemas and other buildings and walls.

Debugging of 860 color steel tile press equipment: The center lines of the upper and lower rollers of the tile press should be on the same plane, with the center wheel as the reference, and the flatness should not exceed 1mm. The gap between each row of upper and lower rollers should be equal, with a gap deviation of+0.1mm. Use conventional measuring tools or feeler gauges to debug the foundation of the tile press, sometimes referred to as the bed, support frame, shaft, rollers, drive chain, and other components required for forming structures. The important requirement for the foundation is rigidity during operation, transportation, and installation. The flatness and levelness of the upper surface used for installing components. Keyways or other components used for rack positioning.

Daily usage regulations for 860 color steel tile press:

1. Electricians are familiar with the electrical circuits and types and performance of electrical equipment in the workshop. If they do not fully understand the performance of electrical equipment, risky operations are prohibited.

2. Electricians should regularly check the condition of equipment such as cables, motors, and control consoles every day. If any problems are found during the inspection, they should be dealt with in a timely manner. When checking the temperature of the motor, first check for no power and then test with the back of your hand.

3. For partial power outage operations, temporary barriers made of dry wood rubber or insulation materials must be used when there is a nearby power source that is less than 0.9 meters away from maintenance personnel.

4. When using electric tools, there is protection against electric shock

5. Except for temporary construction electricity or temporary measures taken, it is not allowed to install temporary wires, hang lights, instruments, tools, welding machines and other switches and sockets randomly, and the original electrical circuit cannot be changed without authorization.

6. When any conductive part of the equipment is found to be grounded, it is not allowed to approach it before cutting off the power supply, except for rescuing the person who has been electrocuted. Keep a distance of 4 meters from the surrounding area and 1.8 meters indoors to avoid step voltage damage.

7. Regularly inspect and maintain electrical equipment according to regulations, and dismantle unused electrical equipment circuits.

8. When using a ladder, the angle between the ladder and the surface should be 60 degrees. When using a ladder on a cement surface, measures should be taken and someone should support the ladder.

9. When repairing color steel equipment, pull down the switch and knife switch, hang a warning sign at the switch and knife switch that reads 'No contract, someone is working', hang a warning sign that reads 'Stop, high voltage danger' on the fence of live equipment and in the aisle where passage is prohibited, and hang a warning sign that reads 'Work should be done here' at the workplace.