850 type color steel tile press machine

The 850 type color steel tile press is composed of feeding, forming, and post forming cutting. The products produced have a smooth and beautiful appearance, uniform paint patterns, high strength, and durability. The 850 type color steel tile press is widely used in industrial and civil buildings, such as factories, warehouses, locomotive depots, aircraft hangars, sports halls, exhibition halls, cinemas, and other buildings and walls. The center lines of the upper and lower rollers of the tile press machine should be on the same plane, with the center wheel as the reference, and the flatness should not exceed 1mm. The gap between each row of upper and lower rollers should be equal, with a gap deviation of 0.1mm. Use conventional measuring tools or feeler gauges for debugging.

Advantages of 850 Type Color Steel Tile Pressing Machine

The products produced by the 850 type color steel tile press are used for roof production in various industrial plants, warehouses, and other areas. The machine has the advantages of high wave peak and high strength, safe and reliable overlapping installation, strong waterproof, anti platform and anti riot performance. The pressure plate produced by this machine solves the problem of roof panel leakage in the conventional series of pressure plates, and can be used with the arching machine to produce beamless arched roofs.

When installing each steel plate of the 850 type color steel tile press equipment, its edge should be accurately overlapped and placed on the previous steel plate, and clamped with the previous steel plate until both ends of the steel plate are fixed. A simple and effective method is to use a pair of pliers to clamp the overlapped steel plates separately.

In the south, colored panels are generally designed as single-layer colored panels. In order to reduce the entry of solar radiation heat into the interior of buildings, insulation layers can be installed in the roof system when installing roof panels. A very simple, economical and effective method is to lay a double-sided reflective foil film on the purlin or Flat noodles before installing the roof steel plate. This method can also be used as steam isolation to reduce condensation.

Main technical parameters of 850 type color steel tile press:

Length x Width x Height 6400mm x 1300mm x 950mm

Forming shaft: diameter 70mm 45 # quenched and tempered

Forming wheel: Material 45 # forged and plated with hard chromium

Transmission mode: chain wheel, chain

Motor: 3KW

Forming rows: 11 rows

Fully automatic computer fixed length cutting system:

Pump station motor: 3KW four stage

Cutting mold: Gr12

Forming speed: 8-10m/min

Pressing thickness: 0.2-0.7mm

Compression width: 1000m

Effective board width: 850mm

The lateral and end overlap of the colored board.