910 type color steel tile press machine

The 910 type color steel tile press adopts the Taiwan Delta DVP14ES host computer and uses a text screen display electronic control system, which is easy to operate and handle. The roll formed profiled plate is not only dignified and elegant, but also beautiful and novel. The appearance is flat, the ripples are uniform, and the utilization rate is also good. The production automation level is also good.

The 910 type color steel tile press uses galvanized steel plates or colored steel plates or aluminum plates of different colors as raw materials. The products produced are used to construct various industrial plants, warehouses, and external roof and wall panels, as well as internal decorative panels or ceilings, to enhance the aesthetic appearance of roofs or walls.

There are two fixing methods for the installation of the 910 color steel tile press: through type and concealed buckle type. Penetrating fixation is a common method for installing color steel tile presses on roofs and walls, which involves using self tapping screws or rivets to fix the color plates to supporting components (such as purlins). Penetrating fixation can be divided into peak fixation, valley fixation, or a combination thereof. Concealed fixing with concealed buckles is a method of fixing the concealed buckles that are matched with the concealed color plate to the supporting parts (such as purlins), and fixing the female ribs of the color plate with the central ribs of the concealed buckle. It is generally used for the installation of roof panels

Precautions for operating the 910 color steel tile press:

1. Before starting the color steel tile press, first check whether the equipment and electrical appliances are in good condition, and cut off the power when leaving work.

2. When the shingle machine is running, do not put a shovel or other objects into the mixer.

3. If the operator needs to enter the mixer for inspection, cut off the power and assign a dedicated person to supervise.

4. Operators should pay attention to the stability of the operating environment. Such as the position of the hopper and discharge port.

5. Non operators are not allowed to operate casually.

6. According to the moisture content of yellow sand, adjust the amount of water added to each machine to make the mixture moist and suitable.

7. Ensure that each mixing time is not less than 120 seconds.

8. According to the mix proportion notice, keep a record of the mixing process.

9. Clean up the excess materials inside the machine and conveyor belt in a timely manner after work, rinse them clean, and keep the surrounding area clean and hygienic.

Technical parameters of 910 type color steel tile press:

Length x Width x Height 6000mm x 1300mm x 910mm

Forming shaft: diameter 70mm 45 # quenched and tempered

Forming wheel: Material 45 # forged and plated with hard chromium

Transmission mode: chain wheel, chain

Motor: 3KW

Forming rows: 10 rows

Fully automatic computer fixed length cutting system:

Pump station motor: 3KW four stage

Cutting mold: Gr12

Forming speed: 8-10m/min

Pressing thickness: 0.2-0.7mm

Compression width: 1000m