765 type large wave glazed tile forming machine

The 765 type large wave glazed tile forming machine uses galvanized steel plates or colored steel plates or aluminum plates of different colors as raw materials. The products produced are used to construct the exterior roof and wall panels, as well as interior decorative panels or ceilings of houses, to increase the aesthetics of the roof or walls. There is no production length limit for this production line, and multiple sets of different data can be set on the computer controller according to construction requirements. After one click 'confirmation', the equipment automatically produces finished products of different lengths according to the data set by the computer. The surface of the finished products produced by this production line is smooth, flat, and scratch free, making it easy to install during construction. The product complies with steel structure building standards.

The 765 type large wave glazed tile forming machine has many parameters to set, which can be done through a text screen. There are two types of parameter settings: device parameters and user parameters. The equipment parameters include: single pulse length, overshoot, molding distance, molding time, cutting time, etc. User parameters include: number of sheets, length, section, end section, pitch, number of sections, and so on. The tile press control system can also perform single board cutting function. The characteristics of the control system are that it is easy to operate, and normal automatic production does not require reversing first. Instead, it can advance, press, and cut in one go. High precision, with a cutting accuracy of less than 0.1mm per piece, meeting the process requirements. The execution part includes a frequency converter driven motor, a hydraulic station motor, two hydraulic solenoid valves for the press type, and two hydraulic solenoid valves for the cutter. The detection part includes: pulse encoder for detecting the length of colored steel tiles, up and down travel switches for pressing, up and down travel switches for cutting blades, up and down operation buttons for pressing, up and down travel buttons for cutting blades, emergency stop switches, hydraulic start stop switches, and so on. It has 14 inputs/10 relay outputs, which just meets the input-output requirements. Paired with KDN text screen, it can complete parameter settings, alarm display, help information, production data display, and more.

Before using the 765 type large wave glazed tile forming machine, it is necessary to check whether the connections are secure, whether the installation bolts and nuts are tightened, and whether sufficient lubricating oil should be added to the left and right chassis before starting the machine for testing. First, run the machine empty and carefully observe whether there is vibration, noise, whether the oil window is filled with oil, and whether the movements of various components are coordinated. Only then can the mold be installed. When installing the mold, cut off the power supply and manually move the motor belt or large gear to rotate the worktable and raise the sliding seat to a high point. Use an object to support it between the worktable and the bottom of the sliding seat to prevent the sliding seat from falling naturally and causing accidents.