840/850 water ripple double-layer color steel tile equipment

Product Details

840/850 water ripple double-layer color steel tile equipment includes: complete machine, PLC computer control system, one-on-one cutting equipment, and dedicated service hydraulic system. The profiled plate formed by the rolling of our company's color steel tile equipment is not only dignified and elegant, but also beautiful and novel. It has a smooth appearance, uniform ripples, high utilization rate, high strength, high degree of production automation, low cost, and excellent quality.

840/850 water ripple double-layer color steel tile equipment upper mold stamping process: The input shaft is driven by an electric motor through a pulley, and the upper shaft is driven by a small gear and a large gear. A set of cam mechanisms drives the sliding seat with the upper mold to move up and down, achieving tile pressing. There are lubrication pumps installed in the left and right chassis, which pass through the oil pipes to deliver lubricating oil to various friction moving parts during machine operation.

The 840/850 water ripple double-layer color steel tile equipment can combine two types of equipment into one, saving floor space, and the cost of double-layer is much lower than that of two single-layer machines, making it a user. The models of the upper and lower layers are determined according to customer requirements.

The maintenance method for 840/850 water ripple double-layer color steel tile equipment:

1. Strictly follow the operating procedures for operation.

2. Before each startup, according to the lubrication chart requirements, add lubricating oil at regular, fixed, and quantitative intervals. The oil should be clean and free of sediment.

3. The double layered tile press should be kept clean and unpainted with rust proof grease.

4. The lubricating oil in the motor bearings should be regularly replaced and the electrical components should be checked for normal and excellent operation.

5. Regularly check whether the V-belt, handle, knob, and button are damaged or severely worn, and replace them in a timely manner, and report for spare parts supplementation.

6. Regularly inspect and repair switches, fuses, handles, and ensure their proper functioning.

7. Oil, lubricate, and clean the machine tool 10 minutes before leaving work every day.

8. It is strictly prohibited for non designated personnel to operate the double-layer color steel tile press, and the machine should be stopped when people leave.

840/850 water ripple double-layer color steel tile equipment technical parameters:

Length * Width * Height: 5000mm * 1300mm * 1500mm

Machine weight: about 3T

Material for the large frame: 250H steel

Medium plate thickness: 14m

Molding axis: 850-70mm, 900-70mm, 910-70mm, 45 # quenched and tempered

Forming wheel: Material 45 # forged and plated with hard chromium

Transmission mode: 0.6-inch sprocket, chain

Power: Main engine 3KW

Forming rows: 850-9 rows 840-11 rows

Forming speed: 8-10m/min

Pressing thickness: 0.2-0.8mm