double-layer tile press

Product Details

The double-layer tile press is a machine that switches between high and low frames, producing one profile of color steel plate and installing it on the low frame, and producing another type of rolling mill and installing it on the high frame. A computer control system and a hydraulic shearing system are used in production. The emergence of this device saves space, reduces the time required to replace two types of panels, and increases output, thus meeting the needs of many small and medium-sized color steel enterprises.

The double-layer tile press adopts automatic control software to achieve production information management. The entire automation control system of the unit adopts a highly integrated network, which makes the performance of the automation system more superior.

The installation of color plates produced by double-layer tile pressing machines is relatively easy to master, while some details are more important to handle. For roof panels, corresponding edge finishing work should be carried out on the roof and eaves to prevent rainwater from entering the roof. The outer panel of the roof can be folded upwards between the ribs at the end of the steel plate using edge closing tools at the ridge. It is used at the upper end of all roof steel plates with a slope less than 1/2 (250) to ensure that water blown in by the wind under the flashing or cover plate will not flow into the building.

The double-layer tile press machine consists of material feeding, forming, and post forming cutting. The products produced have a smooth and beautiful appearance, uniform paint patterns, and are widely used in industrial and civil buildings, such as factories, warehouses, locomotive depots, aircraft hangars, sports halls, exhibition halls, cinemas, and other rooms and walls. Its components include: complete machine, PLC computer control system, hydraulic pump station system, and fully automatic rear shearing system.

Main technical parameters of double-layer tile press:

1. Passive feeding: manual tightening, passive feeding

2. Loading capacity of the material rack: 4.0T

3. Rack: welded with 300H steel

4. Forming machine guided feeding rack form: lateral sliding plate type

5. Forming machine form: Wall panel chain drive, wall panel thickness 14mm

6. Shaft diameter: ￠ 70mm

7. Chain: 0.6-inch single row

8. Forming machine motor power: 3KW bipolar reducer

9. Molding machine line speed: 8m/min

10. Number of molding machine channels: 840 type 11 channels, 900 type 9 channels

11. Roll material: 45 # steel forged solid shaft